Looking for a luxury stay?
Book a Home
Holiday Home Inspection Checklist Dubai: What to Check Between Stays

Holiday Home Inspection Checklist Dubai: What to Check Between Stays

A consistent inspection helps owners see whether a holiday home is ready for its next stay and which issues need attention. Use this walk-through and reporting guide to make checks easier to follow.

21 November 2026
LUXE Team
5 min read

An inspection should answer two simple questions for a Dubai holiday home owner: Is the property ready for the next stay, and what needs attention? A short check between stays can catch visible damage, missing items and equipment faults. A separate, more thorough review can help track wear and plan maintenance over time.

This holiday home inspection checklist Dubai owners can use is a practical operating guide, not a government checklist. The reviewed Dubai Department of Economy and Tourism (DET) guide describes classification inspections, follow-up checks after violations and periodic unannounced visits. Those regulatory inspections are different from an operator’s between-stay walk-through. The guide does not set one universal turnover inspection schedule or owner-report format.

Start with a repeatable inspection method

Use the same route through the property each time. Bring the unit’s inventory, its agreed linen and consumables standards, and a way to record dated notes and photos. Compare what you see with those records rather than relying on memory. Test equipment through its normal controls, and note anything that cannot be checked.

Where possible, carry out the check after cleaning and before the next handover. That lets the inspector confirm both the property’s condition and its readiness. If a fault needs a specialist, record it and arrange the appropriate help; an inspector should not attempt electrical, gas or technical repairs beyond their competence.

A useful route is:

  • Entry and access
  • Living area
  • Bedrooms
  • Bathrooms
  • Kitchen and laundry
  • Balcony or other outdoor space
  • Final whole-unit readiness and safety pass

Walk through the property in order

Entry and access

Check that the entrance is clean and that the door, lock and agreed access method work as intended. Look for visible damage around the frame, signs of a leak and items left behind. Check any entry items listed in the inventory. If access does not work reliably, flag it before the next handover rather than assuming someone else will notice.

Living area

Take a wide view of the room before checking details. Compare furniture, furnishings and equipment with the inventory. Look for marks, broken fittings, loose items or signs of water damage. Test lights and other equipment using normal controls. Record the location of any issue precisely: “mark on left sofa arm” is more useful than “sofa damaged.”

Bedrooms

Check beds, mattresses, visible furniture and storage areas for condition and cleanliness. Confirm that clean, usable linen is ready and that the agreed spare sets are present. Note any missing or damaged inventory separately from linen that simply needs washing or replacement. Check lights and, where safely accessible, look for signs of moisture around windows and ceilings.

Bathrooms

Inspect fixtures, surfaces and visible seals. Run taps briefly through normal controls to check function and look for leaks or slow drainage. Check toilets, showers, lights and ventilation where applicable. Record moisture, loose fittings or damaged surfaces with a close-up photo and a wider image showing where the problem is. A suspected active leak should be escalated promptly.

Kitchen and laundry

Compare utensils, appliances and cleaning tools with the property inventory. Test accessible appliances using their normal controls where a quick, safe check is practical; note anything that needs a longer or specialist test. Look for visible leaks around the sink and laundry area, and check that appliance doors and fittings close properly. Never dismantle equipment to complete an inspection.

The DET holiday homes guide includes classification criteria covering items such as kitchen equipment, cleaning tools and a washing machine with dryer. Requirements vary by unit type and classification. Use the criteria that apply to your property rather than assuming every listed item applies to every unit.

Balcony or outdoor space

If the unit has an accessible balcony or outdoor area, check its visible condition, furniture and doors. Look for broken items, water accumulation or damage that needs attention. Do not lean over a railing or enter an unsafe area to get a photo. Record any concern from a safe position and refer it to an appropriate professional.

Final readiness and safety pass

Before marking the unit ready, check the overall condition again: no cleaning supplies left out, agreed essentials replenished, windows and doors secure, and outstanding issues clearly recorded. Test the air conditioning through normal controls and note whether it appears to respond. A quick turnover check cannot prove that every system will remain reliable, so unresolved faults must stay visible in the report.

Treat a significant AC failure or water leak as a priority. DET’s guide gives a major air-conditioning fault and a water leak as examples of defects that can prevent a guest from staying in a unit. If you notice an unsafe electrical condition or a gas concern, stop using the affected equipment, avoid attempting a repair and seek qualified help before the next handover.

Dubai’s 2026 Public Safety Law%20of%202026%20Concerning%20Public%20Safety.html) includes residential-dwelling provisions relating to fire detectors, specified firefighting equipment, electrical risks, domestic cooking-gas safety and accessible first-aid supplies. Add relevant safety items to your review, and confirm the requirements applicable to your unit with the responsible authorities and qualified service providers.

Keep linen, consumables and fixed inventory separate

These categories need different actions. A missing lamp may need an inventory investigation; a stained sheet needs removal from use; a depleted guest essential needs replenishment. Combining them into a single “missing items” note makes the report harder to act on.

  • Confirm that bed linen and towels are clean, usable and ready for the next stay.
  • Count spare linen against the standard set for your property.
  • Check agreed consumables and note what needs replenishing.
  • Record missing or damaged fixed items against the unit inventory.
  • Note replacements made so the next inspector has an accurate starting point.

DET’s classification guide includes a criterion for two sets of bed sheets and pillow covers for each bed. Check your unit’s applicable category and classification when setting the property standard; do not treat this paragraph as a complete list of DET criteria.

Photograph the condition, not just the problem

Photos make a report easier to review when they follow a consistent pattern. As an operating practice, take a wide image of each room from roughly the same position on each inspection. Add close-ups of damage, missing-item locations or visible faults, plus a wider image that shows where each issue sits in the room.

Label the record with the date, room and issue. Keep before-and-after images together when work is completed, and explain what changed. Avoid photographing guest documents, personal belongings or other unnecessary personal information. Store and share images only through the agreed reporting process.

A photo is evidence of what was visible at that moment; it is not a diagnosis. For example, photograph a water mark and record its location, but leave the cause of a suspected leak for a qualified person to assess.

What should an owner see in an inspection report?

There is no standard owner-report template set by the reviewed official sources. The format below is a practical recommendation: it should let an owner understand what was checked, what remains open and who will act next.

  • Inspection date, unit identifier and inspector’s name
  • Relevant reservation reference, without unnecessary guest information
  • Room-by-room condition notes, including items not checked
  • Dated wide photos and close-ups of issues
  • Inventory discrepancies and linen or consumables actions
  • Results of appliance and AC checks, including any limits to testing
  • Safety and maintenance concerns, with urgency clearly marked
  • Recommended next action, responsible person and status
  • Follow-up notes and confirmation when each issue is closed

Avoid a report that says only “all good” when a check was incomplete. If an appliance could not be tested or a contractor visit is pending, that should be clear. For important faults, the report should also show whether the unit is awaiting a decision before its next handover.

Add a more thorough scheduled review

A between-stay check focuses on immediate condition and readiness. A scheduled review gives more time to compare recurring faults, inspect wear, reconcile the inventory and plan contractor visits. Set the rhythm around the property’s use and your operator agreement rather than treating any single interval as a DET requirement.

Keep a dated history of inspection notes, reported defects, contractor visits and completed work. Dubai’s holiday-home decree requires licensees to provide regular maintenance and keep paper or electronic records related to holiday homes. A clear history also helps owners see whether a reported issue was resolved or has returned.

Finally, check your operator agreement: who performs each inspection, who approves work, how urgent faults are escalated and who confirms the unit is ready to hand back. If you would like to discuss how documented inspections fit into holiday home management, explore our services or contact us at LuxeStay.

Frequently asked questions

Does DET require a holiday home inspection between every stay?

The reviewed DET guide describes regulatory classification inspections, follow-up visits for violations and periodic unannounced visits. It does not prescribe a universal between-stay inspection schedule. A turnover check is a practical operating recommendation; confirm your operator’s process and the requirements applicable to your unit.

What photos should a holiday home inspection include?

As a practical approach, take consistent wide photos of each room and close-ups of visible damage or missing-item locations. Add the date, room and issue, and keep before-and-after photos together. Avoid capturing guest documents or unnecessary personal information.

What should I do if the air conditioning or an appliance fails a check?

Record what was tested, what happened and whether the unit is ready for its next handover. Escalate a significant AC fault promptly. Do not attempt technical repairs beyond your competence; arrange a qualified assessment and keep the issue open in the report until its status is confirmed.

What should an owner-facing inspection report contain?

A useful report identifies the unit, date and inspector; gives room-by-room condition notes; includes dated photos and inventory discrepancies; records appliance and AC test results; and shows each issue’s urgency, next action and closure status. This is a suggested format, not a government-mandated template.

How is a scheduled maintenance review different from a turnover inspection?

A turnover inspection checks visible condition and immediate readiness between stays. A scheduled review allows more time to examine recurring issues, reconcile inventory and plan maintenance. Keep dated records of both, along with contractor visits and completed work.

Get Property Tips Straight to Your Inbox

Get Dubai property insights, investment tips, and exclusive owner guides. No spam — we promise.

By subscribing, you agree to our Privacy Policy and consent to receive updates.